PREVENTATIVE MAINTENANCE

​    ALL TUNE-UPS COME WITH THE FOLLOWING 20pt. INSPECTION:

  •  Remove covers, clean and vacuum out interiors
  •  Remove dirt and debris from motors, vents and circuit boards
  •  Inspect wire harnesses and connections
  •  Lube all chains, bearings, bushings, rollers, pulleys and pivot points
  •  Sand build up of corrosion from motor flywheels and rollers
  •  Check condition of alternators (where applicable)
  • Check condition of motor commutator and brushes (clean motor commutator where applicable)
  •  Check condition and align all drive belts, chains and cables
  •  Lubricate belt and deck
  •  Align and tighten walking belt
  •  Inspect condition of all bearings and bushings
  •  Inspect all other parts for wear and function
  •  Tighten loose crank arms, belts and pulleys
  •  Check calibration of elevation sensors, recalibrate if necessary
  •  Grease drive assemblies and elevation sensors, recalibrate if necessary
  •  Check machine function and operation
  •  Clean exterior with polish / sealer
  •  Run amp / friction tests to test wear on belts and decks
  •  Clean and re-align speed / optic sensors
  •  Complete audible inspection of motor, crank and roller bearings

Copyright 2023 My Site Name. No Animals were harmed in the making. Click me to edit me.